2 投票数 (5.00 平均) 和 417 查看次數  

Douglas DC-3 (N130Q) - Greenville is a town located in Piscataquis County, in the US state of Maine. It's situated at the southern end of Moosehead Lake, the largest lake in the state. Greenville is known for its scenic beauty and outdoor recreational opportunities, such as fishing, hunting, hiking, and wildlife watching...but did you know it's also home to an incredible one of a kind example of the iconic DC-3? Don't feel bad if you answered no - most don't.br /During World War II, the US military needed an aircraft that could operate in a variety of environments, including areas without established airfields. In response to this need, the Edo Corporation designed and built a pair of twin, 1-ton floats that could be attached to a C-47. Each float was 42 feet long, five feet, eight inches wide, almost six feet high, and displaced 29,000 pounds of water. The cellular construction of each float had 14 separate water-tight compartments, and each float also had a 325 gallon fuel tank. The floats had fully retractable, hydraulic wheels, and could land on water, snow or land. The float rudders were connected to the air rudder, which allowed for control of the aircraft while in flight.br /The DC-3A on floats located in Greenville, Maine is a rare example of this technology. The aircraft, which is registered as N130Q, was delivered to the US Army Air Forces in July of 1943 as a Douglas C-53D Skytrooper and served in a variety of roles before being converted back to a DC-3A standard and more notably, to a float plane by Dick Folsom in 1976. The floats used on the aircraft are the original Edo Corporation type, and the aircraft is believed to be the only Gooney Bird on floats left in existence.br /While the floats allowed the DC-3 to operate in areas without established airfields, they also created a significant amount of drag and reduced the aircraft's speed. As a result, the aircraft was about 30 mph slower than its sisters without floats. Despite this limitation, a few C-47s equipped with the floats saw service in locations such as New Guinea, Alaska, and India.br /Today, the DC-3 on floats can be found sitting imposingly at the Greenville Municipal Airport. Though it hasn't flown in years, it was only recently put back on floats in 2020 and there are rumblings that the operator intends to return it to its former glory. If we are lucky, we just may see "Dumbo" splashing around the local lakes and hopefully attending the annual International Seaplane Fly-In at neighboring Moosehead Lake, a once familiar sight.br /Was an absolute pleasure walking around in the freezing cold and snow to capture photos of this iconic aircraft!
/images/icons/csMagGlass.png 中等 / 大圖 / 全尺寸

Douglas DC-3 (N130Q)

提交時間:

Greenville is a town located in Piscataquis County, in the US state of Maine. It's situated at the southern end of Moosehead Lake, the largest lake in the state. Greenville is known for its scenic beauty and outdoor recreational opportunities, such as fishing, hunting, hiking, and wildlife watching...but did you know it's also home to an incredible one of a kind example of the iconic DC-3? Don't feel bad if you answered no - most don't.
During World War II, the US military needed an aircraft that could operate in a variety of environments, including areas without established airfields. In response to this need, the Edo Corporation designed and built a pair of twin, 1-ton floats that could be attached to a C-47. Each float was 42 feet long, five feet, eight inches wide, almost six feet high, and displaced 29,000 pounds of water. The cellular construction of each float had 14 separate water-tight compartments, and each float also had a 325 gallon fuel tank. The floats had fully retractable, hydraulic wheels, and could land on water, snow or land. The float rudders were connected to the air rudder, which allowed for control of the aircraft while in flight.
The DC-3A on floats located in Greenville, Maine is a rare example of this technology. The aircraft, which is registered as N130Q, was delivered to the US Army Air Forces in July of 1943 as a Douglas C-53D Skytrooper and served in a variety of roles before being converted back to a DC-3A standard and more notably, to a float plane by Dick Folsom in 1976. The floats used on the aircraft are the original Edo Corporation type, and the aircraft is believed to be the only Gooney Bird on floats left in existence.
While the floats allowed the DC-3 to operate in areas without established airfields, they also created a significant amount of drag and reduced the aircraft's speed. As a result, the aircraft was about 30 mph slower than its sisters without floats. Despite this limitation, a few C-47s equipped with the floats saw service in locations such as New Guinea, Alaska, and India.
Today, the DC-3 on floats can be found sitting imposingly at the Greenville Municipal Airport. Though it hasn't flown in years, it was only recently put back on floats in 2020 and there are rumblings that the operator intends to return it to its former glory. If we are lucky, we just may see "Dumbo" splashing around the local lakes and hopefully attending the annual International Seaplane Fly-In at neighboring Moosehead Lake, a once familiar sight.
Was an absolute pleasure walking around in the freezing cold and snow to capture photos of this iconic aircraft!

Comments

Please log in or register to post a comment.

動態日誌
需要搜尋 N130Q 1998年以來的完整歷史嗎? 現在購買,一小時內即可收到。
日期 機型 出發地 目的地 離港 進港 飛行時間
No Recent History Data
註冊會員(註冊免費而且快捷!)可以看到3 months的歷史記錄。 加入
 

登入

還沒有帳戶嗎? 現在就註冊(免費),設置諸多客制化功能、航班提醒等等!
您知道FlightAware航班跟蹤是由廣告支持嗎?
通過允許展示來自FlightAware.com的廣告,您可以幫助我們使FlightAware保持免費。我們努力使我們的廣告保持相關性,同時不顯突兀,以創造一流的體驗。在FlightAware上將廣告加入白名單快速而簡單,或者請您考慮選擇我們的高級帳戶.
退出